OM-D E-M1X

READ BEFORE UPDATING

Please be extremely careful to follow the directions when updating your lens or camera firmware.

• Never disconnect the camera until you see “OK” on the back LCD. For larger firmware updates, this can take up to 10 minutes depending on your internet connection/speed.
• Disconnecting the USB cord during the update is a main reason the firmware can fail, which results in the need to send in the lens or camera for repair. So patience is key! 
• Be sure to have a fully charged battery in the camera and installed OM Workspace software. Follow the "Update Your Firmware" link above to obtain this software.

Our Technical Support team is happy to walk you through the process if you would like assistance! Use the Chat or Contact Us functions found on this page.

• AF operation when a M.ZUIKO DIGITAL ED 90mm F3.5 Macro IS PRO lens is attached has been optimized.

• Possible to use focus stacking photography with "M.ZUIKO DIGITAL ED 40-150mm F4.0 PRO".
• Improved precision of focus when using single-focal-length lenses.

• Corrected the following problems that occurred when connecting to an external recorder with Monitor or Record output mode:
  • * The external recorder does not start recording when pressing the camera's record button if REC Bit is On.
  • * Time code is not transmitted to the external recorder if Time Code is On.

• USB transmission with Mac equipped with M1 chip is now supported.
• Stability of connection with ATOMOS products has been improved.

• Bird detection AF has been added to Intelligent Subject Detection AF.
• RAW video output to external equipment is now supported.
  See video captured with our newest firmware update.
  * Compatible external device: ATOMOS NINJA V HDR monitor recorder.
• Focus Stacking Mode is now compatible with the M.ZUIKO DIGITAL ED 150-400mm F4.5 TC1.25x IS PRO lens.
• Video image stabilization has been improved.
• Focus indicator display is now available during manual focusing.

Learn more about this update on our Firmware Updates page.

• Possible to use in-camera focus stacking mode with "M.ZUIKO DIGITAL ED 100-400mm F5.0-6.3 IS".
• Image stabilization performance when using "M.ZUIKO DIGITAL ED 100-400mm F5.0-6.3 IS" has been improved.
  • Roll compensation is available with the image stabilization function of the body, along with the pitch and yaw image stabilization function of the lens.
  • The "M.ZUIKO DIGITAL ED 100-400mm F5.0-6.3 IS" is not compatible with 5-axis Sync IS.

• Possible to use focus stacking photography with "M.ZUIKO DIGITAL ED 12-45mm F4.0 PRO".
• When EVF Auto Switch is set, you can select how the viewfinder is displayed when the monitor is open.
  • Off: Disables the eye sensor. Press the  button to switch between the EVF display and the monitor display.
  • On1: Eye sensor operates regardless of whether the rear monitor is open or closed. Press the  button to switch between the rear-panel monitor Live View display/Super Control Panel display.
  • On2: The eye sensor does not operate while the rear-panel monitor is open. Press the  button to switch between the rear-panel monitor Live View display/Super Control Panel display.
  • See the following for details.

• It's now possible to develop RAW data at high speeds in Olympus Workspace by using the camera's image processing engine.

Please note:

• Camera settings (including date and time) will be reset when you update the firmware of your camera to version 1.1.
• Camera menus are displayed in English after the update.

Our newest imaging software supporting various styles of workflows, this software is packed with features that meet the demands of pro photographers.

Tether select OM-D cameras to your computer and optimize your studio photography experience. Control shutter release, camera settings and image transfer.